How to Configure Wireless Settings on a microPod II Setup for Enhanced DRB III Emulator

1. On a PC with the wiTECH application installed connect the VCI Pod/microPOD with a USB cable and enter IP “172.22.22.22” into the address bar of an Internet browser.
2. Select Wireless Settings in the menu on the left. 

Select New and enter the name of your profile that you are creating and select ADD.

4. In the Security Settings field enter the wiTECH Network

• SSID,
• Security: WPA PSK,
• Enter Key:
• Confirm Key:
  
   

5. Select Save  at the top of page
6. Select Close on the next page
7. Select Manage Networks in the menu on the left
   

8. Select radio button for the wireless interface
   

9. Next to the profile that was just created select the Select & Start button
   

10. Select Close on the next page

11. Once the connection is complete you will see an IP address populate for the wireless interface

• In some cases you may need to select the refresh button