Modified Location Profiles for use with Enhanced DRB III Emulator

DESCRIPTION:
The wiTECH Diagnostic Application is used to launch the Enhanced DRB III Emulator. To discover a microPod II, the wiTECH Diagnostic Application utilizes multicast as the default mechanism for the diagnostic tool discovery process. You can change the discovery mechanism from multicast to HTTP by creating a modified location profile. The Modified Location Profile feature is not a workaround; it is a valid method for tool discovery on non-multicast supported networks.
-
 
PROCEDURE:
  1. To create this profile, select the Modify Location Profiles button in the lower-right side of the application discovery screen.
-
 
 
-
  1. Uncheck "Local Discovery"
  2. Select Add
-
 
 
-
  1. Enter a name for the profile
  2. Under "IP Address," click the "+" button and enter the applicable/possible DHCP tool IP addresses
  3. Select Save
-
 
 
-
  1. The new profile should now be listed and selected in Profile Manager
  2. Select OK
-
 
 
-
  1. Now you will see all the IPs listed under the workgroup. If a tool is not responding, the device name will be greyed out and listed as "unresolved."
-
 
 
-
  1. If the list does not display, close and re-launch the application and restart the wiTECH Server.
    • You can check the "Hide Unresponsive Devices" box if you do not need the devices that are not responding.
-
 

Article Number: 478
Author: Thu, Jul 5, 2018
Last Updated: Thu, Jul 5, 2018
Author: Chris Ordner

Online URL: https://kb.l.fcawitech.com/article/modified-location-profiles-for-use-with-enhanced-drb-iii-emulator-478.html