VEHICLES: 2003-2004 AN (Dakota), DN (Durango), DR (Ram Pickup) 2005 KJ (Liberty) with Next Generation Controller (NGC) SUGGESTIONS: Verify the DRB III is at the latest release using TechTOOLS. Verify the CH7000 red-ended cable is being u... Read More
Enhanced DRB III Emulator
VEHICLES: 2001-2004 JR 2.7L 41TE automatic transmission SUGGESTIONS: Verify the DRB III is at the latest release using TechTOOLS. Verify the CH7000 red-ended cable is being used and is in good condition. Verify that DRB III connections are clean a... Read More
VEHICLES: 2003 RS 2.4L, 3.3L 41TE automatic transmission SUGGESTIONS: Verify the DRB III is at the latest release using TechTOOLS. Verify the CH7000 red ended cable is being used and is in good condition. Verify that DRB III connections are clean an... Read More
If you encounter any error when trying to do a power train flash to a DRBIII vehicle with the DRBIII emulator, delete all files from the Low Folder. (Some computers might have the folders hidden. To Show hidden files and folders, pleas... Read More
On a PC with the wiTECH application installed connect the VCI Pod/microPOD with a USB cable and enter IP “172.22.22.22” into the address bar of an Internet browser. Select Wireless Settings in the menu on the left. ... Read More
Installation Notes: In order to install the Enhanced DRB III Emulator, you must have the wiTECH Diagnostic Application (wiTECH 1.0) installed as well as all supporting software. The wiTECH Diagnostic Application (wiTECH 1.0) can be downloaded and ins... Read More
Log into DealerCONNECT and navigate to the "SERVICE TOOLS & EQUIPMENT" section. Select "TechTOOLS" Search by VIN or YME Select the "DRB III Emulator" checkbox Select the desired flash Select "Download / Update" When the download completes, clo... Read More
Note: A microPod II with serial number starting with letters WFP or WSP is required to use the Enhanced DRB III Emulator. In addition, if the microPod II device is new, it must be updated by launching in the wiTECH Diagnostic Application (wiTECH 1.0)... Read More
DESCRIPTION: The wiTECH Diagnostic Application is used to launch the Enhanced DRB III Emulator. To discover a microPod II, the wiTECH Diagnostic Application utilizes multicast as the default mechanism for the diagnostic tool discovery proce... Read More
The DRB III emulator product for use with wiTECH 2.0 is currently not going to be implemented. Please continue to use the DRB III emulator linked to the original wiTECH 1.0 product installed at you dealership. If this status changes, it wil... Read More
Results 1 - 10 of 14